SWAMPy

✎ CARVE FLESH

EDITING: README.md

# fwupd

[![Build Status](https://github.com/fwupd/fwupd/actions/workflows/ci.yml/badge.svg)](https://github.com/fwupd/fwupd/actions/workflows/ci.yml)
[![Translation Status](https://hosted.weblate.org/widget/fwupd/svg-badge.svg)](https://hosted.weblate.org/engage/fwupd/)
[![CodeQL](https://github.com/fwupd/fwupd/actions/workflows/codeql-analysis.yml/badge.svg)](https://github.com/fwupd/fwupd/actions/workflows/codeql-analysis.yml)
[![Coverity Scan Build Status](https://scan.coverity.com/projects/10744/badge.svg)](https://scan.coverity.com/projects/10744)
[![Fuzzing Status](https://oss-fuzz-build-logs.storage.googleapis.com/badges/fwupd.svg)](https://bugs.chromium.org/p/oss-fuzz/issues/list?sort=-opened&can=1&q=proj:fwupd)
[![Codecov Coverage Status](https://codecov.io/gh/fwupd/fwupd/graph/badge.svg?token=vykt2ROfu9)](https://codecov.io/gh/fwupd/fwupd)
[![OpenSSF Scorecard](https://api.securityscorecards.dev/projects/github.com/fwupd/fwupd/badge)](https://securityscorecards.dev/viewer/?uri=github.com/fwupd/fwupd)
[![OpenSSF Best Practices](https://www.bestpractices.dev/projects/8751/badge)](https://www.bestpractices.dev/projects/8751)

This project aims to make updating firmware on Linux automatic, safe, and reliable.

Additional information is available [at the website](https://fwupd.org/).

## Where to get help?

- GitHub issues & discussions in [this repository](https://github.com/fwupd/fwupd)

## Compiling

See [Building and Debugging](docs/building.md) for how to build the fwupd development environment.

> [!TIP]
> In most cases, end users should not compile fwupd from scratch; it's a
> complicated project with dozens of dependencies (and as many configuration options)
> and there's just too many things that can go wrong.

Users should just have fwupd installed and updated by their distro, managed and
tested by the package maintainer.
The distribution will have also done some testing with how fwupd interacts with
other software on your system, for instance using GNOME Software.

Installing fwupd using [Snap](https://github.com/fwupd/fwupd/wiki/fwupd-snap)
or using [Flatpak](https://github.com/fwupd/fwupd/wiki/fwupd-flatpak) might be
useful to update a specific device on the command line that needs a bleeding
edge fwupd version, but it should not be considered as a replacement to the
distro-provided system version.

### Static analysis

If you're developing code for fwupd, you may use a number of tools for static
analysis during development. Some may also be used in CI and code needs to
comply to certain rules. False positives may be possible in these static
analysis tools.

#### Using clang-tidy

Rules are defined in the `.clang-tidy` file in the repository. Meson
automatically provides targets to run clang-tidy on all files in the build.

For this purpose, depending on your environment, you may also want to ensure
you're setting `CC=clang` during meson setup for better results.

```sh
meson setup build
ninja -C build
ninja -C build clang-tidy
```

Additionally, there is also a target that will try to apply automatic fixes to
source files where possible.

```sh
ninja -C build clang-tidy-fix
```

#### Using gcc `-fanalyzer`

GCC can also provide static analysis. To enable this scan, fwupd provides a
separate Meson option.

```sh
meson setup build -Dstatic_analysis=true
ninja -C build
```

#### Using Tartan

[Tartan](https://gitlab.freedesktop.org/tartan/tartan/-/wikis/home) is a LLVM static
analysis plugin built to analyze GLib code. It can be installed and then run using:

```sh
mkdir build-tartan
CC=clang-18 meson ../
SCANBUILD=../contrib/tartan.sh ninja scan-build
```

## LVFS

This project is configured by default to download firmware from the [Linux Vendor
Firmware Service (LVFS)](https://fwupd.org/).

This service is available to all OEMs and firmware creators who would like to make
their firmware available to Linux users.

You can find more information about the technical details of creating a firmware
capsule in the hardware vendors section of the [fwupd website](https://fwupd.org).

## Basic usage flow (command line)

If you have a device with firmware supported by fwupd, this is how you can check
for updates and apply them using fwupd's command line tools.

`# fwupdmgr get-devices`

This will display all devices detected by fwupd.

`# fwupdmgr refresh`

This will download the latest metadata from LVFS.

`# fwupdmgr get-updates`

If updates are available for any devices on the system, they'll be displayed.

`# fwupdmgr update`

This will download and apply all updates for your system.

- Updates that can be applied live will be done immediately.
- Updates that run at boot-up will be staged for the next reboot.

You can find more information about the update workflow in the end
users section of the [fwupd website](https://fwupd.org).

## Passim

If the [Passim](https://github.com/hughsie/passim/blob/main/README.md) project is also installed
and enabled, fwupd will re-publish the downloaded metadata file to be served on `0.0.0.0:27500`
by default.

Other clients on the same network can make use of this via mDNS/LLMNR to reduce network bandwidth
to configured remotes.

To disable this functionality either set `P2pPolicy=none` in `/etc/fwupd/daemon.conf`, uninstall
the passim package or use `systemctl mask passim.service` on the terminal.

## Reporting status

fwupd will encourage users to report both successful and failed updates back
to LVFS.  This is an optional feature, but encouraged as it provides valuable
feedback to LVFS administrators and OEM developers regarding firmware update
process efficacy.

The privacy policy regarding this data can be viewed on the [lvfs readthedocs site](https://lvfs.readthedocs.io/en/latest/privacy.html).

To report the status of an update, run:

`# fwupdmgr report-history`

Only updates that were distributed from the LVFS will be reported to the LVFS.

## Enterprise use

The flow of updates can be controlled in the enterprise using the
"approved updates" feature. This allows the domain administrator to filter
the possible updates from a central server (e.g. the LVFS, or a mirror)
to only firmware that have been tested specifically in your organization.

The list of approved updates can be enabled by adding `ApprovalRequired=true`
to the remote configuration file, e.g. `lvfs.conf`. Once enabled, the
list of approved updates can be set in `fwupd.conf` using a comma-delimited list.

For example:

```ini
ApprovedFirmware=foo,bar
```

Where `foo,bar` refers to the container checksums that would correspond
to two updates in the metadata file.

Additionally, the list of approved firmware can be supplemented using
`fwupdmgr set-approved-firmware baz` or using the D-Bus interface.

## Other frontends

fwupdmgr is a command line client, but various additional graphical frontends are enumerated in the [fwupdmgr man page](https://fwupd.github.io/libfwupdplugin/fwupdmgr.html#description).

## SAST Tools

- [Coverity](https://scan.coverity.com/) - static analyzer for Java, C/C++, C#, JavaScript, Ruby, and Python code.
- [PVS-Studio](https://pvs-studio.com/en/pvs-studio/?utm_source=website&utm_medium=github&utm_campaign=open_source) - static analyzer for C, C++, C#, and Java code.

## Packaging notes

If you are working or maintaining a package of fwupd downstream, please consider the following notes.

- The Meson build option `systemd_unit_user` should be used carefully, and the specified user (or resulting group) should be inaccessible to
  unprivileged system users. Otherwise, this may pose a risk for privilege escalation. The default value for this setting (`DynamicUser=true`) is
  secure and should be used in the general case.

CANCEL

Name	Type	Size	Modified	Actions
↩ ..	DIR	—	—
📁 builder/	DIR	—	2026-08-04 05:35
📄 README.md	MD	7.5 KB	2026-07-01 15:43	EDIT